:

What is Shimano EP8?

What is Shimano EP8?

Shimano's EP8, short for DU-EP800, features a higher maximum torque of 85Nm compared to the older E8000's 70Nm, topping it by an extra 21%. Maximum power output sits at 500W, although the continuous power output is set at 250W like most motors. The maximum rider support was raised to 400%, compared to the E8000's 300%.

Does Shimano EP8 have walk mode?

The Shimano EP8 system still gives us Eco, Trail and Boost modes with Trail and Boost allowing us to make full use of all 85nm, but there's also a new intelligent Walk mode. ... The Shimano EP8's new intelligent walking mode works in any gear, which is far more user friendly.

How do you charge a Shimano EP8 battery?

If you have an internal battery and wish to charge it on the bike, simply lift open the cap on the charging port and insert the charging plug. Then, connect the power plug to the electrical outlet whereby a light on the charger will indicate that the battery is charging.

Which Ebikes use Shimano Motors?

The existing Shimano E8000 motor is arguably the most popular motor in mountain e-bikes. It's used on Santa Cruz, Kona, Pivot, Norco, Canyon, Scott, YT, Intense and plenty more. The new motor, called EP8, is 10 percent smaller and is a lot lighter.

Can you replace E8000 with EP8?

The new crank arms are specific to the EP8 motor, so there's no cross-compatibility with the E8000/7000 drive units and crank arms. Power-to-weight ratio has gone through the roof, since the new EP8 motor is actually lighter than the E8000 motor.

How powerful is the Shimano E8000 motor in Watts?

250-watt It uses a a 250-watt electric motor which produces 70 newton meters of torque, and is powered by a 504 watt-hour battery pack. Generally speaking, those numbers are very similar to the e-mountain bike systems by Bosch and Specialized.

Can you swap E8000 for EP8?

The new motor also comes in 300g lighter and 10% smaller, leaving the bike lighter and providing more ground clearance, while the same mounting points mean you can swap any E8000 motor out with the new EP8. ... Simply set up your two profiles on your phone, connect it to your bike and away you go.

Can you use Di2 while charging?

You can still use your Di2 shifters while the battery is charging (the derailleurs move and the charge light remains lighted).

How do you know when your Shimano battery is fully charged?

1:392:53How to Check Shimano Di2 Battery Status - YouTubeYouTube

Can I put a bigger motor on my ebike?

However, limiting the wattage of ebike motors doesn't necessarily limit how powerful they can be. ... Using a bigger motor means using a bigger battery to travel the same distance. With the battery being the most cost heavy part of an e-bike, this translates into additional savings.

What is the maximum assistance delivered by the SHIMANO STEPS ep8 motor?

Compact and light for maximum trail performance
MOTOR:Mid-drive motor, 250 Watt | 85 Nm
ASSISTANCE:up to 25 km/h
ASSIST LEVEL:3 assist levels: Eco | Trail | Boost
BATTERY CAPACITY:756 Wh (2x 378 Wh T.E.C.)
CHARGING TIME:approx. 3 hours per battery
1 altra riga

How powerful is the Shimano E8000 motor?

Shimano E8000 STEPS spec overview The motor puts out a maximum of 250W of power and a peak of 70Nm of torque, while the battery is a 500Wh Lithium Ion design that's mounted to the frame, though Shimano is working with manufacturers to develop integrated designs.

What is the most reliable e bike motor?

The best e-MTB motors
  • Shimano EP8. A great step up for mountain biking's default component brand. ...
  • Bosch Line CX. German engineering legacy where you need it on an e-MTB. ...
  • Yamaha PW-X2. A great mid-drive motor for technical climbs. ...
  • Giant Sync Drive eBike system. ...
  • Fazua Evation. ...
  • Specialized SL 1.1. ...
  • TQ HPR 120S. ...
  • Panasonic GX 0.

Can I leave Di2 charging overnight?

All I wanted to no is if I could leave it on charge over night .......... Yes, you can. The light on the charger is on when it's charging and off when it isn't. Plug it into whatever you can.

How long does a Di2 charge last?

between 20 kilometers A modern Di2 battery will last between 20 kilometers per charge. This depends a bit on how often you shift and also your shifting style. The front derailleur has to work harder than the rear derailleur and therefore also consumes more energy.

How long should a Di2 battery last?

between 20 kilometers A modern Di2 battery will last between 20 kilometers per charge. This depends a bit on how often you shift and also your shifting style. The front derailleur has to work harder than the rear derailleur and therefore also consumes more energy.

Can you overcharge Di2?

All I wanted to no is if I could leave it on charge over night .......... Yes, you can. The light on the charger is on when it's charging and off when it isn't.

How fast is 500W in mph?

Battery Capacity and Calculating Range + Speed
Battery + Motor (Flat Terrain 165 lbs Male)Max SpeedAverage Charge Time
500w25 mph (40.23 km/h) (G)40 minutes
750w28 mph (45 km/h) (G)60 minutes
1000w35 mph (56.32 km/h) (R)80 minutes
1500w40 mph (64 km/h) (R)120 minutes
1 altra riga

How fast does a 1000w electric bike go?

roughly 35mph How fast is 1000-watt in MPH? A 1000-watt electric bike will take you at speeds of up to roughly 35mph, varying depending on factors such as weight, terrain, and personal preference.

Does Shimano make electric bikes?

The high-end e-bike system SHIMANO STEPS is our high-end e-bike component brand. We develop and produce a wide range of e-bike systems in our production facilities across the world. ... So, whether you're an adventurous mountain biker or urban commuter, there is always a bicycle brand that suits you.